‘Enhance your network speed and efficiency with the best 10 GbE switch. Streamline data transmission among connected devices for seamless communication and faster performance.
What exactly is a 10Gbe switch?
A network switch is a computer networking device that connects devices on a computer network by receiving, processing, and forwarding data to the destination device using packet switching.
10Gbe signifies that the speed will be ten times faster than a gigabit connection. There will be no visible difference. It’s the same cable as well as the same port. If you copy large files daily and data transfer speed is critical, you should examine faster network solutions than standard gigabit networks. 1GbE will become obsolete and replaced with a new standard shortly.
What is a managed or smart switch?
Cheaper switches are frequently referred to as unmanaged or non-smart. This means a primary 10GbE NAS will perform fundamental switch operations as efficiently as feasible. When connected to a Synology, the NAS system will allow load balancing. However, 10GbE is not always sufficient. This is when the link aggregation function comes in handy. It is only possible on smart / managed switches. This means you can connect two or more cables between a NAS and a switch to create a 20GbE connection (both ends must be connected).
Best 10 Gbe Switches For 2024
NETGEAR XS508M
Price: $449
- CONFIGURATION OF ETHERNET PORTS: 8 10G ports
- UPLINK PORT FLEXIBILITY: 1 x 1G/10G SFP+ port (shared)
- PLUG-AND-PLAY: No software to install or configuration required;
- VERSATILE MOUNTING OPTIONS: Supports desktop or rackmount placement; includes all mounting hardware in the box;
- WHISPER-QUIET DESIGN: Reduces fan noise to protect your home office or business environment.
- PROSAFE LIFETIME PROTECTION: A Lifetime Limited Hardware Warranty, Next Business Day Replacement and 24/7 chat with a NETGEAR specialist are all included.
- ENERGY EFFICIENT: Designed to optimise electricity usage while minimizing operating costs. The majority of models are IEEE802.3az Energy Efficient Ethernet compatible.
- LONGEVITY: Every NETGEAR Network switch is extensively tested for dependability, quality, and performance.
QSW-2104-2T
Price: $149
The QSW-2104-2T is an unmanaged switch with 2-port 10GbE RJ45 and 4-port 2.5GbE RJ45 that allows you to expand your network environment by connecting a broader range of devices with varying bandwidth requirements. The QSW-2104-2T functions quietly and efficiently because to its near-silent fanless design and compliance with IEEE 802.3az (Energy Efficient Ethernet, EEE). The QSW-2104-2T is the ideal solution for creating an economical high-speed network environment in your home or workplace, thanks to its excellent performance and superb functionality.
- Two 10GbE RJ45 ports (compatible with the 10GBASE-T/NBASE-T standards) enable five speeds (10G/5G/2.5G/1G/100M) to handle varying bandwidth demands.
- Using existing Cat 5e cables, four 2.5GbE RJ45 (2.5G/1G/100M) ports may instantly enhance your network speed by 2.5 times.
- There are no complicated settings to configure, and auto-negotiation assures optimal performance.
- Automatic loop identification and blocking to ensure continuous network operation • Noiseless operation thanks to the unique fan less design with vented construction.
QNAP QSW-2104-2S
Price:169
The QSW-2104-2S is a simple unmanaged switch with 2 ports 10GbE SFP+ and 4 ports 2.5GbE RJ45 that connects to a variety of devices to satisfy your bandwidth requirements.
The QSW-2104-2S functions quietly and efficiently thanks to its near-silent fanless design and IEEE 802.3az (Energy Efficient Ethernet, EEE).
The QSW-2104-2S, with its high performance and good functionality, is suitable for creating an economical high-speed network environment in your home or company.
- Two 10GbE SFP+ ports (supports 10G/1G) provide high-speed network performance • Four 2.5GbE RJ45 (2.5G/1G/100M) ports instantly boost your network speed by 2.5 utilising existing Cat 5e cables
- There are no complicated settings to configure, and auto-negotiation assures optimal performance.
- Automatic loop identification and blocking to ensure continuous network operation • Noiseless operation thanks to the unique fan less design with vented construction.
Zyxel XGS1210-12
Price: $278
The Zyxel Multi-Gigabit switch XGS1250-12 is designed for scalability in network growth. It has eight Gigabit Ethernet ports, three Multi-Gigabit ports with 5-speed 100M/1G/2.5G/5G/10G compatibility, and one 10G SFP+ port. The port combination can readily connect to a variety of devices such as an iMac Pro, a 10G NAS or server, WiFi 6 APs, and new 2.5G motherboards to maximize their speed delivery for a more efficient network.
- It has 8 x 1G ports, 2 x 10G SFP+ ports, and 2 x 2.5G Multi-Gigabit ports.
- The adaptable port configuration accommodates a wide range of network applications.
- An easy-to-use web-based setup wizard.
- Using an intuitive web GUI, you can quickly manage and configure the switch.
- Fan less and energy-efficient design.
NETGEAR GS110EMX
Price: $219
The NETGEAR GS110EMX Smart Managed Plus Switch is intended for desktop or rackmount use and includes 8 Gigabit Ethernet ports, 2 x 10G/Multi-gig ports, ProSAFE Lifetime Protection, and other features.
- 8 x 1G and 2 x 1G/2.5G/5G/10G Multi-Gig Ethernet connections.
- Plus software with simple interface provides basic managed features for configuring, securing, and monitoring your network.
- Supports desktop, wall, or rackmount placement and includes all necessary mounting hardware in the box.
- Lifetime Limited Hardware Warranty, Next Business Day Replacement, and 24/7 chat with a NETGEAR expert.
ASUS XG-U2008
- Hyper-Fast 10Gbps Networking – The two next-generation 10G ports provide astounding speeds of up to 10Gbps, making them ideal for ultra-busy networks and bandwidth-intensive tasks in any office or studio. Simply put it in and connect your devices, and you’re done! There is no software or setup required, and 10G signal quality LEDs ensure that your wires are working properly.
- Stylish and durable Design- The durable all-metal design, iconic spun-metal finish, and thin dimensions make it a stylish addition to any establishment.
- IEEE802.3az compatible energy efficiency design
- Silent operation is appropriate for noisy environments.
QSW-M2108-2C
Price: $432
The Layer 2 Web Managed Switch QSW-M2108-2C has two 10GbE SFP+/RJ45 combo ports and eight 2.5 Gigabit ports. The QSW-M2108-2C supports Layer 2 switching and network administration using a user-friendly web user interface, allowing for flexible deployment in hybrid high-speed network environments and providing an entry-level network management solution useable even by non-IT experts.
The QSW-M2108-2C is 10GbE and NBASE-T compliant, with up to five speeds (10G / 5G / 2.5G / 1G / 100M) to deliver faster transmission speeds over existing Cat 5e and 6a cables. The QSW-M2108-2C provides cost-effective upgrading to 2.5GbE or 10GbE networking while maximizing bandwidth and assuring secure network maintenance thanks to its excellent performance, user-friendly management, and desktop form factor.
QSW-308-1C
Price: $373
The QSW-308S has three 10GbE SFP+ ports and eight Gigabit ports for connecting different devices and enabling a hybrid high-speed network in homes and offices. Direct attach copper (DAC) connections can connect directly to SFP+ devices using SFP+ interfaces. 10G-SFP-T copper transceiver modules can also be used to link 10GBASE-T/NBASE-TTM devices using RJ45 Category 6, 5, or 5e cable. The QSW-308S has a switching capacity of 76Gbps, ensuring that each port is used to its utmost capability.
The QSW-308-1C is a three-port 10G SFP+ and eight-port Gigabit Unmanaged Switch having three 10GbE SFP+ ports (one of which is a 10GbE SFP+/RJ45 combination port) and eight Gigabit ports. The QSW-308-1C provides a quick cost-effective upgrade to a hybrid high-speed network environment and is compatible with 10GbE and NBASE-T technologies to enable up to five speeds (10G / 5G / 2.5G / 1G / 100M).
When utilized with existing connections, the SFP+/RJ45 (copper) combo connector delivers faster transmission speeds. The QSW-308-1C, with its desktop size and silent operation, integrates in seamlessly with homes and offices while providing great performance, low latency, and superb functionality.
QSW-M2106-4C
Price: $465
The Layer 2 Web Managed Switch QSW-M2106-4C has four 10GbE SFP+/RJ45 combo ports and six 2.5 Gigabit ports. The QSW-M2106-4C supports Layer 2 switching and network administration using a user-friendly web user interface, allowing for flexible deployment in hybrid high-speed network environments and providing an entry-level network management solution useable even by non-IT experts. The QSW-M2106-4C provides cost-effective upgrading to 2.5GbE or 10GbE networking while maximizing bandwidth and assuring secure network maintenance thanks to its excellent performance, user-friendly management, and desktop form factor.
QSW-M2106-4S
Price: $369
The Layer 2 Web Managed Switch QSW-M2106-4S has four 10GbE SFP+ fiber ports and six 2.5 Gigabit ports. The QSW-M2106-4S supports Layer 2 switching and network administration using a user-friendly web user interface, allowing for flexible deployment in hybrid high-speed network environments and providing an entry-level network management solution useable even by non-IT experts. The QSW-M2106-4S provides cost-effective upgrading to 2.5GbE or 10GbE networking while maximizing bandwidth and assuring secure network maintenance thanks to its excellent performance, user-friendly management, and desktop physical factor.
QSW-M2106R-2S2T
Price: $489
The Layer 2 Web Managed Switch QSW-M2106R-2S2T has two 10GbE SFP+ fiber ports, two 10GbE RJ45 ports, and six 2.5GbE RJ45 ports. The QSW-M2106R-2S2T supports Layer 2 switching and network management via a user-friendly web user interface and provides an entry-level network management solution in hybrid high-speed network environments. Due to their half-width architecture, two QSW-M2106R-2S2T can be put in a 1U rack space.
NetGear XS505M-100EUS
Price: $499
- ETHERNET PORT CONFIGURATION: 4 10G ports • UPLINK PORT FLEXIBILITY: 1 x 1G/10G SFP+ port
- PLUG & PLAY: Simple setup requires no software installation or configuration.
- VERSATILE MOUNTING OPTIONS: Supports desktop or rackmount setup and contains all mounting gear.
- WHISPER-QUIET DESIGN: Reduces fan noise to safeguard your home or office environment.
- LIFETIME PROTECTION WITH PROSAFE: • ENERGY EFFICIENT: Designed to optimize power usage and lower operating costs with an industry-best Lifetime Limited Hardware Warranty, Next Business Day Replacement, and 24/7 chat with a NETGEAR specialist. The majority of models are IEEE802.3az Energy Efficient Ethernet compatible.
- LONGEVITY: Every NETGEAR Network switch is extensively tested.
Buffalo BS-MP2008
Price: $549
The 802.3bz IEEE Standard is supported by Buffalo’s BS-MP20 Series of entry-level unmanaged multi-gigabit network switches. It is the ideal scalable 10GbE networking solution. Improve the performance and efficiency of your business and gaming.
- Lifetime warranty with 24/7 technical support in North America (with registration).
- Low-cost multi-gigabit switch with 2.5/5 Gbps and 10 Gbps network scalability.
- IEEE 802.3bz and 802.3an standards.
- It delivers a 2.5 Gbps / 5 Gbps speed without requiring CAT6 cabling upgrades.
- VLAN/QoS traffic control options are provided.
- 8 ports/sturdy metal chassis.
- Includes 19-inch rack mounting tabs and an integrated power supply unit.
QSW-1208-8C
Price: $765
The QNAP QSW-1208-8C is a 12-port 10GbE unmanaged switch that allows you to rapidly and cost-effectively improve your network environment. It also supports 10GBASE-T and NBASE-T standards, allowing you to take advantage of greater network speeds with your current Cat 5e and 6a cables. SFP+ and RJ45 ports are offered to meet a variety of network requirements. It’s the excellent solution for updating your network to accommodate 10GbE connections, thanks to its great performance, low latency, and superb functionality.
- 12 10GbE SFP+ ports, plus eight shared 10GBase-T ports NBASE-T support 5-speed auto-negotiation (10G/5G/2.5G/1G/100M) on an unmanaged switch.
- Existing cables can be used with NBASE-T capability. Legacy devices will be backwards compatible.
- Most devices may take use of the QSW-1208-8C’s 10GbE connectivity via a combination of SFP+ (fiber) and RJ45 (copper) ports.
- Ire 802.3az (EEE) aids in the reduction of power usage for slow and idle connections.
- 27K Mac address cache capacity
TP-LINK TL-SX1008
Price: $109
The tl-sg1008mp is an 8-port Gigabit desktop/rack mountable switch that supports the PoE+ standard on all 8 ports. It allows for the straightforward expansion of a wired network by sending power and data over a single Ethernet connection.
The tl-sg1008mp has a total power budget of 126W, with up to 30W per port, and can power more powerful devices such as wireless access points (APs), IP cameras, or IP phones. Furthermore, the tl-sg1008mp may save up to 75% of power usage with to new energy-efficient technology, making it an ideal alternative for your business network. Operating temperatures range from 0 to 50 degrees Celsius (32 to 122 degrees Fahrenheit).
- Eight 10Gbps Ports for Lightning-Fast Connections8 10-Gigabit ports enable maximum performance with 10G/multi-gig bandwidth and provide up to 160 Gbps of switching capability.
- Auto-NegotiationAuto-negotiation intelligently detects link speeds and intelligently adjusts between 5-speeds (100Mb/1G/2.5G/5G/10G) for compatibility and optimal performance for all your devices, including 2.5G/5G/10G WiFi 6 AP, 10G NAS, 10G PCIe Adapter/NIC, 10G Server, gaming computer, 8K video, and more.
- Reliable and quiet operation 802.3X flow control assures consistent data transfer, and a smart fan with adjustable speed ensures little noise when in use.
- Plug and Play: Easy installation with no software installation or settings required.
- Sturdy Metal Case: Case: The durable metal case and desktop/rackmount design are ideal for various applications.
- Lifetime Protection Limited: You can collaborate with us because we offer industry-leading limited lifetime protection and 24/7 technical support.
Netgear M4300-12X12F
- XSM4324S is the model number for this item.
- 12 Copper 100M / 1G / 10G Ports
- 12 SFP+ 1G / 10G ports
- 1 Modular Bay with a 250W Modular Power Supply integrated 480 Gps Switching Fabric APS250W
- Front-to-Back Fixed Fan 36.9dB Management Options
- Ethernet: 1G out-of-band port (rear)
- RJ45 RS232 (Back) Console
- Mini-USB (Front) Console
- USB (Front) storage
- Single-pane-of-glass NMS300 management platform with support for bulk configuration
- Dual firmware image and configuration file for minimal service interruption during upgrades.
NETGEAR XS724EM
Price: $1999
The NETGEAR XS724EM Smart Managed Plus Switch is intended for desktop or rackmount installation and includes 24-Port 10G/Multi-Gigabit Ethernet, 2 x 10G SFP+ ports (both shared), ProSAFE Lifetime Protection, and other features.
- ETHERNET PORT CONFIGURATION: 24 Multi-Gig/10G ports
- UPLINK PORT FLEXIBILITY: 2 x 1G/10G SFP+ ports (both shared)
- CONFIGURATION & CONTROL: Management software with an intuitive graphical user interface provides basic features for configuring, securing, and monitoring your network.
- VERSATILE MOUNTING OPTIONS: Supports desktop or rackmount placement, with all mounting gear included in the package. • WHISPER-QUIET DESIGN: Reduces fan noise to safeguard your home office or commercial environment.
- PROSAFE LIFETIME PROTECTION: Industry-leading Lifetime Limited Hardware Warranty, Next Business Day Replacement, and 24/7 chat with a NETGEAR specialist
- ENERGY EFFICIENT: Designed to optimize electricity usage while minimising operating costs. The majority of models are IEEE802.3az Energy Efficient Ethernet compatible.
- LONGEVITY: Every NETGEAR Network switch is extensively tested for dependability, quality, and performance.
NETGEAR XS728T
Price: $1853
- ETHERNET PORT CONFIGURATION: 24 Gigabit ports and 2 STACKABLE 10G ports
- UPLINK PORT FLEXIBILITY: 2 x 10G SFP+ ports. This switch allows for stacking connectivity.
- ADVANCED CONFIGURATION & CONTROL: Management software with an intuitive graphical user interface provides enhanced control for secure setup, access, and SNMP (NMS 300) management.
- VERSATILE MOUNTING OPTIONS: Supports desktop or rackmount setup and contains all mounting gear.
- WHISPER-QUIET DESIGN: Reduces fan noise to safeguard your home or office environment.
- PROSAFE LIFETIME PROTECTION: A Lifetime Limited Hardware Warranty, Next Business Day Replacement, and 24/7 chat with a NETGEAR specialist are all included.
- ENERGY EFFICIENT: Designed to optimize electricity usage while minimizing operating costs. The majority of models are IEEE802.3az Energy Efficient Ethernet compatible.
- LONGEVITY: Every NETGEAR Network switch is extensively tested for dependability, quality, and performance.
Frequently Asked Questions (FAQs)
Can I get a used 10GbE switch?
Yes, eBay is constantly selling and listing items on auction switches. They came from enterprises that were closed due to improvements. You can choose this method if you are willing to buy anything with no warranty. Some ports may be defective or slow.
Is a managed or unmanaged switch required?
Because it cannot be configured, an unmanaged switch is always less expensive. If you have a Synology NAS, load balancing will be enabled automatically even if you have an unmanaged switch. This is sufficient if you do not intend to raise the bandwidth above 10GbE. Link aggregation is required if you wish to combine two or more ports and double your bandwidth throughput.
To enable this functionality, you will require a smart switch (managed).
How will a 10G network assist me?
Include 10Gbps network connectivity in file and application servers, as well as high-performance workstations.
Upgrade your onboard network adapter to 10 Gigabit for faster communication
Improved network performance and lower host CPU utilization
Create a video/audio editing console with 10 Gbps access to network storage
Improved network performance with lower CPU utilization
What type of cable do I need for a 10g network?
CAT6 cables are most often used in a standard network. However, for 10GbE speeds, you’ll need something more interference-resistant. Something known as CAT6A or CAT7 cable.
What 10Gbe ready NAS can I connect to?
DS1822+, DS1621xs+ TS-453BT3-8G
A PCIe slot can be used to add a 10GbE connection.
Is it time for my network to be upgraded to a 10GB NIC (Network Interface Card)?
Finally, it may be stated that it is time to use a 10G network. Everything we do now has far larger file sizes than it used to. With modern phones and cameras, picture sizes of 5MB have become the standard. High-resolution photos can have file sizes of up to 100MB. The same is true for video. YouTube, new high-end phones, and TVs are increasing the 4K video resolution popularity.
A 4K resolution movie will need 4GB of your storage space. This is how the compressed format looks. If you want to change the capacity of such a file, add another digit. You might have noticed that many NAS–network drives are performing at the same transfer speeds. Typically, the NAS devices will have only one network port on the back of the box.
Speed is the same since hard drives inside them already operate quicker than the network port can push through. As a result, the standard gigabyte network is obsolete and must be replaced by something faster and more reliable. New technology necessitates faster network speeds. Luckily, the networking market is ready for the change. Because of competition, 10g hardware prices have dropped considerably.
What is the most affordable 10Gb RJ45 switch?
The NetGear 8-port switch has two 10GbE ports. As a result, you have two choices. Connect the NAS to the switch and then to your PC over 10GbE. Alternatively, attach the NAS to a switch, and then connect 8 computers via normal 10GbE connection.
A fast backup or video editing solution with a potential speed of 10Gb/s is the first option. In the second option, all eight users connected via gigabit cable will potentially experience the same transfer speed of 1Gb/s. If the NAS was linked via a 1GbE connection, one client connection may possibly have a significant impact on the transfer speed of any other connected user.
Why is RJ45 used instead of SFP?
We are all familiar with RJ45 or typical internet/network cable. SFP is a fast standard connection that is widely used in server rooms and data centers. It is a fast and pricey cable. RJ45 is preferable because it is backward compatible with individuals attempting to connect to older machines. If not everyone has a 10GbE connection, they can still connect to your network and work with a 5GbE or 1Gbe cable. There is no need for an adaptor.
